Deep Groove Ball Bearings

We are deep groove ball bearings manufacturer with low noise and high precision for more than 15 years.

Besides standard 60000 series deep groove ball bearings, we also supply Inch series ball bearings R and MR series,Inserted ball bearing, Flanged ball bearings, Rail transit bearings and Custom ball bearings according to customer requirements.

We keep improving material and craftmanship to make sure the bearing with longer working life.

60000 series Deep Groove Ball Bearings

If there is no special requirements about bearing install, sealing and fit, we can all using basic structure of 60000 series deep groove ball bearings with open style.

60 series deep groove ball bearing(open)

62 series deep groove ball bearing(open)

63 series deep groove ball bearing(open)

64 series deep groove ball bearing(Open)

60000 series Deep Groove Ball Bearings with Seals

Deep groove ball bearing with seals of material NBR sealing with one side (RS) and two side (2RS).We mostly using light contact sealing.

Appropriate amount grease has been put in the bearing with sealing type, and when assembling, there is no need to wash and add grease again.

60 series deep groove ball bearing(Sealed 2RS)

62 series deep groove ball bearing(sealed type 2RS)

63 series deep groove ball bearing(sealed type 2RS)

60000 series Deep Groove Ball Bearings with Shields

Shields with one side (Z)or two sides(ZZ) of deep groove ball bearings are made of 08# or 10# steel. There is radical gap between shield and inner ring rib. Limiting speed is same as basic open style deep groove ball bearing. Grease is filled when assembling the bearing, and it is no need to wash and refill the grease when using the bearing.

60 series deep groove ball bearing(shield ZZ)

62 series deep groove ball bearing(Metal shield ZZ)

63 series deep groove ball bearing(open)

Inserted ball bearings

We can custom made inserted ball bearing by drawing or specific model.

Flange ball bearings

All standard ball bearings with flange we can produce by customer requirements.

FAQ of Ball Bearings

What kind of ball bearings can you supply?

ZMS can supply deep groove ball bearings60,62,63,64 series and 67,68,69 thin ball bearings. And we also can supply inserted ball bearings, flange ball bearings, custom ball bearings.

What materials do you use to produce ball bearings?

Normally we use good Chrome steel to produce ball bearings. But if customer need stainless steel, or ceramic material we can also do as customer requirements.

What quality of ball bearings can you supply?

High quality we can supply precision and noise level of P0,P6,P5 ZV1, ZV2,ZV3 and ZV4 if needs.

Can you supply OEM and ODM for ball bearings?

Yes, we can supply OEM and ODM as customer requests.

Do you have MOQ of ball bearings?

For standard modals, if we have stocking, then there is no MOQ, but if need to produce or custom made, please consult with us. Different modals will be different MOQ.

Can you supply drawing and samples?

For standard modals yes, we can supply both drawing and samples.

How do you charge of the sample?

Free sample but the Express charge will be on customer end.

What is the advantage of your ball bearings?

Reliable quality with high precision but low noise. There are More than 1,000 precision inspection instruments, testing equipment. The craftmanship is mature. The products adopts optimized structure and can reaching international level. There is automatic heat treat line,20 automatic grinding line, 20 automatic assembling line.

What package do you use for ball bearings?

Small series ball bearings, we use plastic bottle+ carton+ pallet

Medium size: kraft paper+ carton+pallet

Plastic bag+individual box(whilte)+carton(netural)+pallet this will add the cost

Plastic bag (color with logo)+ individual box(colorful with logo)+ carton(print with logo)+pallet this will add extra cost

Deatil packing, please get back to us.

What documents can you supply?

Commercial invoice, packing list, certificate of original, BL

Other documents, please get in touch with us first to checking.

What terms do you use for the business?

FOB, CIF

EXW, DDP and DDA need to discuss

What payment way do you use?

TT mostly

LC discussion

What value we can supply for you?

Improve working efficiency,

Reduce the cost,

Short your products meet your customer

What service can you supply?

ZMS can give a free suggestion of ball bearings choosing. The area covering car engine, pump and motor and so on. Supply correct installation instruction and bearing using basic knowledge. We positive participate new product develop and special structure bearings design and manufacturing.

Where are the ball bearings are exported?

We have been exporting to more than 40 countries in the world. So we welcome any friends and business partners to cooperate with us.

Articles Useful for Customers

Full Guide-Deep Groove Ball bearings

Bearing Model	Basic dimension/mm			Load capacity/kN		Limited speed(r/min)		Weight/kg
Open	d	D	B	Cr	Cor	Grease	Oil	W
605	5	14	5	1.05	0.50	30000	38000	0.005
606	6	17	6	1.95	0.72	30000	38000	0.006
607	7	19	6	2.88	1.08	28000	36000	0.007
608	8	22	7	3.32	1.38	26000	34000	0.015
609	9	24	7	3.35	1.40	22000	30000	0.016
6000	10	26	8	4.58	1.98	22000	30000	0.019
6001	12	28	8	5.10	2.38	20000	26000	0.022
6002	15	32	9	5.58	2.85	19000	24000	0.031
6003	17	35	10	6.00	3.25	17000	21000	0.040
6004	20	42	12	9.38	5.02	16000	19000	0.068
6005	25	47	12	10.00	5.85	13000	17000	0.078
6006	30	55	13	13.20	8.30	11000	14000	0.113
6007	35	62	14	16.20	10.50	9500	12000	0.148
6008	40	68	15	17.00	11.80	9000	11000	0.185
6009	45	75	16	21.00	14.80	8000	10000	0.230
6010	50	80	16	22.00	16.20	7000	9000	0.250
6011	55	90	18	30.20	21.80	7000	8500	0.360
6012	60	95	18	31.50	24.20	6300	7500	0.385
6013	65	100	18	32.00	24.80	6000	7000	0.410
6014	70	110	20	38.50	30.50	5600	6700	0.575
6015	75	115	20	40.20	33.20	5300	6300	0.603
6016	80	125	22	47.50	39.80	5000	6000	0.821
6017	85	130	22	50.80	42.80	4500	5600	0.848
6018	90	140	24	58.00	49.80	4300	5300	1.100
6019	95	145	24	57.80	50.00	4000	5000	1.150
6020	100	150	24	64.50	56.20	3800	4800	1.180
6021	105	160	26	71.80	63.20	3600	4500	1.520
6022	110	170	28	81.80	72.80	3400	4300	1.890
6024	120	180	28	87.50	79.20	3000	3800	1.990
6026	130	200	33	105.00	96.80	2800	3600	3.080
6028	140	210	33	116.00	108.00	2400	3200	3.170
6030	150	225	35	132.00	125.00	2200	3000	3.903
6032	160	240	38	145.00	138.00	2000	2800	4.830
6034	170	260	42	170.00	170.00	1900	2600	6.500
6036	180	280	46	188.00	198.00	1800	2400	8.510
6038	190	290	46	188.00	200.00	1700	2200	8.865
6040	200	310	51	205.00	225.00	1600	2000	11.640
6044	220	340	56	252.00	268.00	1400	1800	18.000
6048	240	360	56	270.00	292.00	1200	1600	20.000
6052	260	400	65	292.00	372.00	1100	1500	28.800
6056	280	420	65	305.00	408.00	950	1300	32.100
6064	320	480	74	345.00	510.00	900	1100	48.400
6072	360	540	82	400.00	622.00	750	950	68.000
6080	400	600	90	512.00	868.00	630	800	89.400
60/500	500	720	100	625.00	1178.00	450	560	117.000

Bearing Model	Basic dimension/mm			Load capacity/kN		Limited speed(r/min)		Weight/kg
Open	d	D	B	Cr	Cor	Grease	Oil	W
623	3	10	4	0.65	0.22	38000	48000	0.002
624	4	13	5	1.15	0.40	36000	45000	0.003
625	5	16	5	1.88	0.68	32000	40000	0.004
626	6	19	6	2.80	1.05	28000	36000	0.008
627	7	22	7	3.28	1.35	26000	34000	0.014
628	8	24	8	3.35	1.40	24000	32000	0.016
629	9	26	8	4.45	1.95	22000	30000	0.019
6200	10	30	9	5.10	2.38	20000	26000	0.032
6201	12	32	10	6.82	3.05	19000	24000	0.035
6202	15	35	11	7.65	3.72	18000	22000	0.045
6203	17	40	12	9.58	4.78	16000	20000	0.064
6204	20	47	14	12.80	6.65	14000	18000	0.103
6205	25	52	15	14.00	7.88	12000	15000	0.127
6206	30	62	16	19.50	11.50	9500	13000	0.200
6207	35	72	17	25.50	15.20	8500	11000	0.288
6208	40	80	18	29.50	18.00	8000	10000	0.368
6209	45	85	19	31.50	20.50	7000	9000	0.416
6210	50	90	20	35.00	23.20	6700	8500	0.463
6211	55	100	21	43.20	29.20	6000	7500	0.603
6212	60	110	22	47.80	32.80	5600	7000	0.789
6213	65	120	23	57.20	40.00	5000	6300	0.990
6214	70	125	24	60.80	45.00	4800	6000	1.084
6215	75	130	25	66.00	49.50	4500	5600	1.171
6216	80	140	26	71.50	54.20	4300	5300	1.448
6217	85	150	28	83.20	63.80	4000	5000	1.803
6218	90	160	30	95.80	71.50	3800	4800	2.170
6219	95	170	32	110.00	82.80	3600	4500	2.620
6220	100	180	34	122.00	92.80	3400	4300	3.190
6221	105	190	36	133.00	105.00	3200	4000	3.780
6222	110	200	38	144.00	117.00	3000	3800	4.420
6224	120	215	40	155.00	131.00	2600	3400	5.300
6226	130	230	40	165.00	148.00	2400	3200	6.120
6228	140	250	42	179.00	167.00	2000	2800	7.770
6230	150	270	45	203.00	199.00	1900	2600	9.780
6232	160	290	48	215.00	218.00	1800	2400	12.220
6234	170	310	52	245.00	260.00	1700	2200	15.241
6236	180	320	52	262.00	285.00	1600	2000	15.518
6238	190	340	55	285.00	322.00	1500	1900	18.691
6240	200	360	58	288.00	332.00	1400	1800	22.577
6244	220	400	65	355.00	365.00	1200	1600	36.500
6248	240	440	72	358.00	467.00	1000	1400	53.900

Bearing Model	Basic dimension/mm			Load capacity/kN		Limited speed(r/min)		Weight/kg
Open	d	D	B	Cr	Cor	Grease	Oil	W
634	4	16	5	1.88	0.68	32000	4000	0.005
635	5	19	6	2.80	1.02	28000	36000	0.008
6300	10	35	11	7.65	3.48	18000	24000	0.053
6301	12	37	12	9.72	5.08	17000	22000	0.051
6302	15	42	13	11.50	5.42	16000	20000	0.080
6303	17	47	14	13.50	6.58	15000	18000	0.109
6304	20	52	15	15.80	7.88	13000	16000	0.142
6305	25	62	17	22.20	11.50	10000	14000	0.219
6306	30	72	19	27.00	15.20	9000	11000	0.349
6307	35	80	21	33.40	19.20	8000	9500	0.455
6308	40	90	23	40.80	24.00	7000	8500	0.639
6309	45	100	25	52.80	31.80	6300	7500	0.837
6310	50	110	27	61.80	38.00	6000	7000	1.082
6311	55	120	29	71.50	44.80	5600	6700	1.367
6312	60	130	31	81.80	51.80	5000	6000	1.710
6313	65	140	33	93.80	60.50	4500	5300	2.100
6314	70	150	35	105.00	68.00	4300	5000	2.550
6315	75	160	37	113.00	76.80	4000	4800	3.050
6316	80	170	39	123.00	86.50	3800	4500	3.610
6317	85	180	41	132.00	96.50	3600	4300	4.284
6318	90	190	43	145.00	108.00	3400	4000	4.970
6319	95	200	45	157.00	122.00	3200	3800	5.740
6320	100	215	47	173.00	140.00	2800	3600	7.090
6321	105	225	49	184.00	153.00	2600	3200	8.050
6322	110	240	50	205.00	178.00	2400	3000	9.530
6324	120	260	55	228.00	208.00	2200	2800	12.200
6326	130	280	58	253.00	242.00	2000	2600	14.770
6328	140	300	62	275.00	272.00	1900	2400	18.330
6330	150	320	65	288.00	295.00	1700	2200	21.870
6332	160	340	68	313.00	340.00	1600	2000	26.430
6334	170	360	72	335.00	378.00	1500	1900	31.140

Bearing Model	Basic dimension/mm			Load capacity/kN		Limited speed(r/min)		Weight/kg
Open	d	D	B	Cr	Cor	Grease	Oil	W
6403	17	62	17	22.70	10.80	11000	15000	0.268
6404	20	72	19	31.00	15.20	9500	13000	0.400
6405	25	80	21	38.20	19.20	8500	11000	0.529
6406	30	90	23	47.50	24.50	8000	10000	0.710
6407	35	100	25	56.80	29.50	6700	8500	0.926
6408	40	110	27	65.50	37.50	6300	8000	1.221
6409	45	120	29	77.50	45.50	5600	7000	1.520
6410	50	130	31	92.20	55.20	5300	6300	1.855
6411	55	140	33	100.00	62.50	4800	6000	2.316
6412	60	150	35	109.00	70.00	4500	5600	2.811
6413	65	160	37	118.00	78.50	4300	5300	3.342
6414	70	180	42	140.00	99.50	3800	4500	4.896
6415	75	190	45	154.00	115.00	3600	4300	5.739
6416	80	200	48	163.00	125.00	3400	4000	6.752
6417	85	210	52	175.00	138.00	3200	3800	7.933
6418	90	225	54	192.00	158.00	2800	3600	9.560
6420	100	250	58	223.00	195.00	2400	3200	12.900
6422	110	280	65	225.00	238.00	2000	2800	18.340

Bearing Model	Basic dimension/mm			Load capacity/kN		Limited speed(r/min)		Weight/ kg
2RS	d	D	B	Cr	Cor	Grease	Oil	W
6000 2RS	10	26	8	4.58	1.98	15000	32000	0.019
6001 2RS	12	28	8	5.10	2.38	14000	28000	0.020
6002 2RS	15	32	9	5.58	2.85	13000	26000	0.030
6003 2RS	17	35	10	6.00	3.25	12000	24000	0.040
6004 2RS	20	42	12	9.38	5.02	11000	22000	0.070
6005 2RS	25	47	12	10.00	5.85	9000	18000	0.080
6006 2RS	30	55	13	13.20	8.30	7500	16000	0.120
6007 2RS	35	62	14	16.20	10.50	6500	13000	0.160
6008 2RS	40	68	15	17.00	11.80	6000	12000	0.190
6009 2RS	45	75	16	21.00	14.80	5400	11000	0.240
6010 2RS	50	80	16	22.00	16.20	4800	9500	0.280
6011 2RS	55	90	18	30.20	21.80	4800	9000	0.380
6012 2RS	60	95	18	31.50	24.20	4300	8000	0.410
6013 2RS	65	100	18	32.00	24.80	4100	7500	0.410
6014 2RS	70	110	20	38.50	30.50	3800	7000	0.600
6015 2RS	75	115	20	40.20	33.20	3600	6700	0.640
6016 2RS	80	125	22	47.50	39.80	3400	6300	1.050
6017 2RS	85	130	22	50.80	42.80	3200	6000	1.100
6018 2RS	90	140	24	58.00	49.80	3000	5600	1.160
6019 2RS	95	145	24	57.80	50.00	2800	5300	1.210
6020 2RS	100	150	24	64.50	56.20	2600	5000	1.250
6021 2RS	105	160	26	71.80	63.20	2400	4800	1.520
6022 2RS	110	170	28	81.80	72.80	2200	4500	1.870
6024 2RS	120	180	28	87.50	79.20	2000	4000	2.000